Veneer dryer is suitable for drying the core veneer with the thickness from 1.0mm to 6.5mm. Core veneer dryer is a fixed, but it is very easy to operated. Only need loading the wood veneer manual and uploading wood veneer manual.
Main Features of Veneer Dryer:
- The use of aircraft alloy tank side note,
- Domestic of the art hydraulic system
- PLC programmable control system so that it smooth,rapid closure,stable,effective and preloading
- Hot platen:It is drilled from excellent carbon solid steel and it is high precision, high strength and durable.It is manufactured on special worktable,so as to keep the hot platen easy to operate.
- Heating system:It can be heated by steam bolier,oil heater or electri oil heater.The steam bolier is low in cost and suitable for common production,yet it is high pressure vessels,so it should be operated carefully.As to the oil heater,it is adjustable,safe, uniform temperature, energy saving and so on,yet it may cost much than steam bolier.The electric oil heater is environmental protection instead of using coal or wood as it’s fuel,but it may cost lots of electric energy
- Hydraulic system:It is “Triple Filter”and it has excellent oil pump and electric motor.It uses right-angled one-way valve so that it can work smoothly.The pressure is adjustble.
- Cylinder:It is worked through excellent CNC precision machine tool.It uses high quality oil envelop so as to avoid of oil leaking.
- Control system:Microcomputer ,Manually/Automatic controlled.It can lift the hot platen, close the separation,add the pressure,keep the pressure,keep time, descend the hot platen and so on.
Technical Data of Veneer Dryer
|Layers||15 layers||20 layers|
Diameter of cylinder
|2 units Φ80mm two-way cylinder|
|Platen material||seamless steel pipe||Seamless steel pipe|
|The thickness of pipe||3mm||3mm|
|No-load closing time||about 45s||45s About 45s|
|Separation between layers||50mm||50mm|
|Heating medium||heat conducting oil||Oil heater|
of heat conducting oil